Square Tube Key Fittings
Designed to give a 90° butt joint between two pipes. Frequently used for the joint between end uprights and the middle rail where the railing site is straight and level. Also used for base ties on racking. This fitting cannot be used where through pipe is required to be joined within the fitting. This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
The Long Tee is designed to provide a butt joint between two pipes at right angles to each other. It allows the through pipe to be joined inside the fitting, Often used as to connect the top rail to an intermediate upright in a level installation.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
Most frequently paired to give a 90° corner joint for the middle rail of safety railing and other rectangular structures. the upright passes through the fitting.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
Usually paired to give a 90° joint between the middle rail and an intermediate upright on safety railing. the upright passes through the fitting.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
The Variable Elbow is designed to make joints at an angle of between 105° and 165°.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
A 90° corner joint most frequently used for the top rail of safety railing. it can also be considered for the corner joint of benches, work tables, and other rectangular structures.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
Square base used on structures where the fixing required is positional only. Frequently used as a wall fixing bracket. Holes provided for countersunk fathead screw fixings only.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
Ideal when a structural fixing is required for guard rail and balustrades. The holes are of sufficient diameter to insure proper fixing with either mechanical or chemical anchor. The two set screws in the vertical socket give greater side-load stability to the upright. it is recommended that the fixing holes in the flange should be in line with the applied load.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
Designed to carry handrails along walls or to fix structures back to walls. The pipe passes through the fitting and cannot be joined with the fitting. It is also used to attach toe boards to the base of guardrail uprights. Holes provided for countersunk flat head screw fixings only.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
Most frequently used in multiple upright structures to tie a center upright with horizontal pipes in four directions. The upright passes through the fitting.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
A swivel fitting for attachment of angled pipe to a fat surface.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
The Female Swivel is designed to be used in combination with 173F to make "Swivel Kits" used primarily for bracing, but can also be used to overcome problems with joints of odd or varying angles.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
The Female Swivel is designed to be used in combination to make "Swivel Kits" used primarily for bracing, but can also be used to overcome problems with joints of odd or varying angles.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
Complete combination fitting. Reducing combinations are available sizes DA1 through DE5.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
Most frequently used to tie uprights with horizontal pipes in three directions, all 90° to the upright. The upright passes through the fitting.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
This link is mainly used to attach chains.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
These pipe couplings have been developed to mount panels in pipe constructions, among other things.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
These pipe couplings have been developed to mount panels in pipe constructions, among other things.This Kee Clamp fittings are available in pipe outer size 25mm and 40mm (only two Sizes) or as per customer need with hot dip galvanizing, powder coating in any colour, and zinc plating.
About Us
At Bhagat Impex, we specialize in the export of high-quality goods with a focus on reliability, integrity, and global standards. Our commitment to excellence has earned us the trust of partners worldwide.
Address List
- Plot No.6, Near Phase 7, Nichi Mangali, Ludhiana. 141010.
- +91-75278-00065
- info@bhagatimpex.com